To make general pressure gauge applicable to medium which are strong corrosive, high-temperature, high-viscosity, easy to crystallize & solidify, and with suspended solid, also to avoid direct contact between general pressure gauge and medium, to make
Accuracy: 2.5%, 1.6%
Ranges (MPa):-0.1~0;-0.1~0.06;-0.1~0.15;-0.1~0.3;-0.1~0.5;-0.1~0.9;-0.1~1.5;-0.1~2.4;0~0.1;0~0.16;0~0.25;0~0.4;0~0.6;0~1.0;0~1.6;0~2.5;0~4;0~6;0~10;0~16;0~25;0~40;0~60;
Working pressure: dead load is up to 3/4 of upper limit; stress alternating is up to 2/3 of upper limit; instant pressure is up to upper limit.
Working environment temperature: -40~70℃ (relative humidity is not more than 85%)
Temperature influence: when working temperature deviation is 20±5℃, the error change is not more than 0.6%/10℃.
Pressure measuring element: double capsule
Case: stainless steel
Scale: stainless steel
Needle: aluminum, black
Gauge glass: common glass
Connection: flange type, thread connection
Gauge is with micro zero-adjusting device
Selection Table
Y | Pressure gauge | |||
| Dial dia | 100 150 | ||
|
| Structure surface | MF MG ML MC MN | |
|
|
| Wetted parts | 316L Tantalum, Hastelloy, Monel Alloy, PTFE |
Y-100BFZ/MF/316L |
Item | Code | Name |
① | General pressure gauge | |
②connector | Z | Direct |
ZN | Damper | |
SR | Radiator | |
RL | Hose connection | |
| 1,(2),(4) m | |
GL | Angle connection | |
| Material | A, CS B, 1Cr18Ni C, 316 |
③ isolator | MF | Open convexity (low/medium pressure) |
ML | Thread (low/medium pressure) | |
MG |
| |
MZ | Bolt | |
MH | Homogenizer | |
MC | Sanitation type | |
MN | Nut | |
④diaphragm material | Generally speaking, it’s 316, other material please note when you order. |