Pressure Balanced Cage type Control Valve
Pressure Balanced Cage type Control Valve
Brief Description

Type 5622 Pressure Balanced Cage type Control Valve is a control valve with balanced pressure and high performance. It applies to flash steam and cavitation situation caused by pressure drop, solid sleeve can protect the valve body from flash steam and ca

Details

Valve body:

Type: straight cage ball type

Nominal size: 40 - 600mm

Working pressure: ANSI125、150、300、600; PN1.6、4.0、6.4MPa

End connection: Flange, BW, SW (applicative for DN15-DN50)

Material: WCB,WC6,WC9,C5,LCB,LC2,LC3,CF8,CF8M etc.

Valve bonnet : Standard type (P)  : -17-+230℃

                        Extended I type(E1):-45-17℃、+230-566℃
                        Extended II type(E2): -100-45℃

        Extended III type (E3): -196-100℃

        Cooling fin type:+230-600℃

Packing gland : Bolted compressed-type

Packing : V-type PFTE, PTFE asbestos and flexible graphite

 

Trim

Valve disc : Pressure balanced cage type disc

Control characteristic: Equal percentage, linear, quick open

Trim material:304,304 overlay STL, 316,316 overlay STL, 316L,17PH etc.-
 

Actuator

  1. Pneumatic-actuator

Type 6100 Pneumatic Diaphragm Actuators

Membrane material: Ethylene propylene rubber filled with nylon

Spring range: 20-100KPa、40-200KPa、80-240KPa

Air supply pressure: 140KPa、160KPa、280KPa、400KPa

Air supply connection:Rc1/4、Rc3/8

Environment Temp: -30-+70℃

Acting type: air open ( reverse acting), air close (positive acting)

 

Note: (1) The type of large diameter or high pressure difference control valve can also be equipped with 6400 series straight stroke piston actuator.
(2) if the environment temperature below 30 ℃, please contact with Cepai engineers.


(2)Electric actuators

Type: 6200 series electric actuators

Voltage: 220V、380V

Environment Temp: -30-+70℃

Control Signal: 4-20mADC(supply 4-20mA signal feedback as per customer requirement)

 

Performance
Leakage rate: Metal seat:accordance with ANSI B16.104IV level which is less than 0.01% of rating CV.  

           Nonmetal seat: accordance with ANSI B16.104IV level which is less than 10-7 of rating CV.

Adjustable: 50:1(Optional 100:1)

Variation:±1%( with positioner) ±3% (no positioner)

Linear: ±2%( with positioner) ±5% (no positioner)

Accessories ( As per requirements)

Positioner, Filter Regulator, hand wheel, limit switch, solenoid valve, valve position transmitter, pneumatic valve, speed increaser, lock up valve etc.