Home > Products > CEPAI Valves > Top Guiding Control Valve > Angle Single-Seated Control Valve > 5697High Pressure Angle Single-Seated Control Valve
5697High Pressure Angle Single-Seated Control Valve
5697High Pressure Angle Single-Seated Control Valve
Brief Description

Type 5697 High Pressure Angle Single-Seated Control Valve is a kind of top guiding control valve. Less pressure drop loss, large flow rate, wide adjustable range. Guiding area of valve disc guiding is big, and good vibration resistance, equipped with spring diaphragm or piston cylinder actuators, which is compact structure, and big output force.

Details

Body
Type: Single-Seated ball type angle valve

DN: 25-80mm

DN: ANSI900、1500、2500;

Connection: Flange,BW, SW(apply to DN15-DN50)
Body Material: WCB, WC6, WC9, C5,LCB,LC2,LC3,CF8,CF8M

Bonnet Type: Standard type(P):-5~+230℃

Elongation type(E1): +230-566℃

Gland type: Bolt pressing type
Packing: flexible graphite
 

 

Valve trim
Valve disc: Single type plunger valve disc

Control characteristic: Equal percentage, linear, quick open

Trim material:304,304 overlay STL, 316,316 overlay STL, 316L etc.

 

Actuator

 

  1. Pneumatic-actuator

Type 6100 Pneumatic Diaphragm Actuators

Membrane material: Ethylene propylene rubber filled with nylon

Spring range: 40-200KPa、80-240KPa

Air supply pressure: 140KPa、160KPa、280KPa、400KPa

Air supply connection:Rc1/4、Rc3/8、Rc1/2

Environment Temp: -30-+70℃

Control signal: 4-20mADC( supply 4-20mA signal feedback as per customer requirement)

Acting type: air open ( reverse acting), air close (positive acting)

 

Note: (1) The type of large diameter or high pressure difference control valve can also be equipped with 6400 series straight stroke piston actuator.
(2) if the environment temperature below 30 ℃, please contact with Cepai engineers.
 


(2)Electric actuators

Type: 6200 series electric actuators

Voltage: 220V、380V

Environment Temp: -30-+70℃Control Signal: 4-20mADC(supply 4-20mA signal feedback as per customer requirement)

 

Performance

Leakage rate: accordance with ANSI B16.104IV level which is less than 0.01% of rating CV.         
 

Adjustable ratio: 50:1

Variation:±1%( with positioner) ±3% (no positioner)

Linear: ±2%( with positioner) ±5% (no positioner)

Accessories ( As per requirements)

Positioner, Filter Regulator, hand wheel, limit switch, solenoid valve, valve position transmitter, pneumatic valve, speed increaser, lock up valve etc.